The working principle of the servo motor is that the magnetic winding and control winding inside the motor receive internal signals (current, angle, eccentricity, etc.), and correct the drive signal to the motor through the action of the magnetic field to adjust the angle of rotor rotation.

Servo motors are divided into AC servo motors and DC servo motors. AC servo motors have smooth speed control, high stability and controllability; DC servo motors are extremely accurate in speed control, easy to operate, and low in price. Servo motors are closely related to our lives and are widely used in electronic machinery, medical equipment and other fields.

Servo motors are mainly composed of input shafts, ball bearings, encoding discs, phototransistors, scales and light emitting diodes.

In the servo motor, the ball bearing mainly plays the role of guiding the rotation of the shaft, and can also bear the role of the idling parts on the shaft. In the servo motor, the main bearing models used are: 6306, 6309, 6313.

Causes of Servo Motor Bearing Overheating
The motor itself: 1. The inner and outer rings of the bearing are too tight.
2. There is a problem with the shape and position tolerance of parts, such as poor coaxiality of machine base, end cover, shaft and other parts.
3. Improper selection of bearings.
4. The bearing is poorly lubricated or the bearing is not clean, and there are sundries in the grease.
5. Shaft current.
In terms of use: 1. Improper installation of the unit, such as the coaxiality of the motor shaft and the driven device does not meet the requirements.





