NEWS

Home/NEWS

10Jul, 2021

Working Bearing
Choose smaller radial clearances for precision bearings, bearings for machine tool spindles, etc. If there are special requirements for bearing clearance, the bearing can meet t...
20Jun, 2021

Selection Of Internal Clearance Of Ball Bearings
The clearance changes due to the temperature difference between the inner and outer rings when the bearing is working.
10Jun, 2021

Bearing Internal Clearance And Specified Value
Therefore, selecting the internal clearance of the bearing is an important research project for the bearing that determines the structural size.
30May, 2021

Bearing Clearance
This is due to the difference in the degree of fit involved in the installation and the difference in the thermal expansion of the inner and outer rings and related parts of the...
20May, 2021

Guidelines For Ball Bearings
According to the above characteristics, piston engines usually use fluid film bearings, while jet engines almost exclusively use ball bearings. Various types of bearings have th...
10May, 2021

Characteristics Of Ball Bearings
The following characteristics make ball bearings less desirable than fluid film bearings.
30Apr, 2021

Ball Bearing Applicable Occasions
Within a reasonable range, changing the load, speed and working temperature has only a small effect on the good performance of the ball bearing.
20Apr, 2021

What Are The Uses Of Ball Bearings
Designers often have to decide whether to use a ball bearing or a fluid film bearing in a particular application.
10Apr, 2021

Ball Bearing Use
At high speeds (such as in gyro ball bearings), this use can be extended to include free rotation with almost no wear in the bearing.
20Mar, 2021

Ball Bearing Structure
Ball bearings are mainly composed of four basic elements: ball, inner ring, outer ring and retainer, also called cage or retainer. General industrial ball bearings meet AISI 521...
10Mar, 2021

Jack Joint
Ball bearing is a kind of rolling bearing. The ball is installed between the inner ring and the outer ring and can bear a large load. Also called ball bearings.
20Feb, 2021

What Are The Performance Of Ball Bearings
The disadvantage is that the process is more complicated, the cost is increased, and it also brings higher working noise.

First 1 2 3 456 Last 5/6